This converter is used for transmitting or converting DC signals.
It accepts various signals such as mA, mV, and V, and transmits them as isolated DC signals.

This converter is used to supply power to various transmitters used in the field and to receive their signals, outputting isolated signals.

This converter is used to convert the output from an RTD temperature sensor into a DC signal.
It accepts various signals such as PT100Ω and JPT100Ω and transmits them as isolated DC signals.

This converter is used to convert the input signal from a variable resistor (POTENTIOMETER) into a DC signal.

This converter is designed with 4 Display FNDs and has the advantage of allowing scale values to be set according to the on-site conditions.

This converter is used to convert an alternating current (AC) signal into a direct current (DC) signal.

This converter is used to convert the output from a temperature sensor, such as a THERMOCOUPLE SENSOR, into a DC signal.
It accepts various types of signals (R, K, E, T, B, J, S) and transmits them as isolated DC signals.

This converter is used to convert the input signal from a pressure sensor, such as a LOAD CELL, into a DC signal.

This converter is a device that converts various types of frequency signals into DC signals.
It uses frequency signals such as Voltage Pulse, Open Collector, and Encoder Pulse.

This converter accepts a DC signal as input and outputs a pulse or frequency proportional to the input.

This converter is a high-speed type converter used for the purpose of rapidly transmitting or converting DC signals.

This converter is a device that outputs a pulse signal proportional to the input pulse signal, using a pulse (PULSE) signal as the input source.

This converter is a device that takes an undivided pulse (PULSE) signal as the input source and outputs a unit pulse signal proportional to the input.

This converter is a power supply that converts AC power input into DC.

This converter uses two types of DC signals as input sources and outputs the averaged sum of the two signals.

This converter uses a DC signal as the input source and outputs the inverted DC signal.